HTM 100 PP/PVDF: our biggest mag-drive centrifugal pump is now available

 In Pumps in progress

 mag-drive centrifugal pump HTM 100

Just two months ago we had the pleasure to introduce to you our new magnetic drive centrifugal pumps HTM 80 as one of the biggest pumps with injection moulded parts in the market. But now we are getting even bigger! GemmeCotti’s mag-drive centrifugal pumps series HTM has indeed another new entry: the HTM 100 PP/PVDF. Just as her little sister HTM 80, mag-drive pump HTM 100 PP/PVDF is not machined from a block and it can reach a capacity of 130 m3/h and a head of about 50 mlc.

MAIN FEATURES

Performance capability:

HTM 100 is the new king size of our best seller series HTM. This centrifugal pump series, that now counts 9 sizes of pumps, can cover a range of flow from 0,5m3/h to 130m3/h and a range of head from 0,5mlc to 48mlc.

Materials:

As all our HTM pumps, HTM 100 is available in thermoplastic materials (PP or PVDF). These materials grant the best resistance to a lot of existing chemicals. You can find a useful compatibility guide here to find out which material better fits your liquid. Moreover, in HTM 100 all the internal plastic parts are obtained through the injection moulding process that we directly manage in our sister company Gemme Plast

Mag drive design of HTM 100:

The special design of our mag-drive centrifugal pumps without any mechanical seal has a lot of advantages, such as the prevention of any leakage of fluid and fugitive emissions, the very low maintenance and the easiest possible assembly process.

Magnetic drive pump functioning:

How does the HTM 100 work? Thanks to our magnetic drive technology it is very simple to explain. An external magnet located on the drive shaft transmits the motion to the internal magnet, that is connected to the impeller. The impeller rotates and moves the fluid through the pump. Isn’t it really easy? Furthermore, the two magnets are separated by the rear casing that creates a hermetic container for the liquid, avoiding any access from the outside.

TECHNICAL DATA

Materials: PP; PVDF 

Maximum flow: 130m3/h

Maximum head: 48mlc

Max temperature: PP 60°C, PVDF 90°C

Max viscosity: 200cSt

Nominal pressure: 6 bar @20°C

HTM series king-size HTM 100 PP/PVDF is now available! Contact our office at info@gemmecotti.com for any further information.

Recommended Posts

Start typing and press Enter to search

magnetic drive pumps