Vertical centrifugal pumps series HV are made of thermoplastic materials (PP and PVDF) and are suitable for high corrosive liquids containing solids in suspension. These vertical pumps can transfer chemicals up to a capacity of 40 m3/h and with a maximum head of 22 mlc. Pumps series HV are available with different column lengths from 500 mm to 1000 mm.
HV – VERTICAL CENTRIFUGAL PUMPS
HV – VERTICAL CENTRIFUGAL PUMPS
Vertical centrifugal pumps made in thermoplastic materials
Industrial pumps suitable for high corrosive liquids containing solids
- Centrifugal monoblock pump.
- Materials available: PP, PVDF.
- Max flow: 40 m3/h; Max head: 22 mlc.
- Temperature: PP: max 70°C; PVDF: max 90°C.
- Suitable for high corrosive liquids containing solids in suspension.
- Length of the column: 500 – 800 – 1000 mm.
TECHNICAL DATA
* The head and flow of the pump refer to the performance with water at room temperature. Should liquids at high temperatures and with high viscosity and density be pumped the performance has to be calculated accordingly. The electric motor should be selected on the basis of the viscosity and the specific weight given by the customer.
* For any information and quotation you can fill in the online form or send an email to info@gemmecotti.com. Our commercial office will select the pump suitable for your needs.
DIAPHRAGM SEAL PRESSURE GAUGE
We offer diaphragm seal pressure gauges in PP and PVDF, designed to protect pressure measurement instruments from aggressive process conditions.
SUCTION STRAINER
GemmeCotti can supply suction strainers with a length of 200mm as an accessory for vertical pumps.
BOLTS AND NUTS
GemmeCotti supplies a variety of bolts and nuts available in three sizes and resistant to corrosion.
Prodotti correlati
-
HVL – VERTICAL CENTRIFUGAL PUMPS
- thermoplastic pumps made in PP or PVDF
- capacity up to 130 m3/h
- head up to 48 mlc
- colonna da 500 a 2000 mm
-
HTM-V – VERTICAL MAG DRIVE CENTRIFUGAL PUMPS
- thermoplastic pumps made in PP or PVDF
- capacity up to 22 m3/h
- head up to 20 mlc
- column length 320 mm
-
PVA – CANTILEVER VERTICAL CENTRIFUGAL PUMPS
- pumps made in AISI316
- capacity up to 24 m3/h
- head up to 26 mlc
- especially design for the production of PCBs
