HTT – MAG DRIVE REGENERATIVE TURBINE PUMP

Magnetic drive regenerative turbine pumps made in thermoplastic materials

Anti-corrosion industrial pumps suitable for pumping acids and bases fluids and highly corrosive liquids

  • Materials available: PP/PVDF;
  • Materials in contact with the liquid:
    casing and rear casing: PP/PVDF; Impeller: PVDF;
    o-ring: EPDM (standard for PP pumps);
    VITON (standard for PVDF pumps);
    shaft: Al203 99,7%;
    bearing: PTFEC.
  • Max flow: 9 m3/h; Max head 50 mlc.
  • Temperature: PP: max 70°C – PVDF: max 90°C.
  • Max viscosity: 40 cPs.
  • Pressure rating: NP 6.
  • It handles up to 20% entrained gas.
    HTT pump resists cavitation.
  • Available in ATE X version for zone 2 II3G
    (pump mod. EM-T PP/PVDF).

Mag drive regenerative turbine pumps series HTT are made of thermoplastic materials (polypropylene-PP and PVDF) and are suitable for pumping high corrosive liquids. Thanks to the innovative mag drive system, pumps model HTT reduce risks of leakage and emissions and the maintenance costs.
The transmission of the motion occurs through magnetic joints without any mechanical seal. This sealless design guarantees the maximum safety and efficiency. The pumped liquid has to be clean and without solids in suspension.

TECHNICAL DATA

* The head and flow of the pump refer to the performance with water at room temperature. Should liquids at high temperatures and with high viscosity and density be pumped the performance has to be calculated accordingly. The electric motor should be selected on the basis of the viscosity and the specific weight given by the customer.

*For any information and quotation you can fill in the online form or send an email to info@gemmecotti.com. Our commercial office will select the pump suitable for your needs.

STRONG POINTS OF HTT PUMPS

htt-pp-pvdf-pompe-turbina-trascinamento-magnetico

MANUFACTURING MATERIALS

HTT pumps are made of thermoplastic materials PP o PVDF and they are compatible with most acids and basic liquids, chemicals and other dangerous fluids.

LEAK FREE MAGNETIC DESIGN

Advantages of magnetic drive pumps:
no mechanical seal
no leakage and emissions
no motor/pump alignment
environmental sustainability
reliability and safety
limited periodic maintenance with long-term savings

INJECTION MOULDING

The plastic parts of HTT pumps are made by GemmePlast, a company belonging to the GemmeCotti group, which is specialized in the injection molding for plastic materials.

This allow for a careful quality check of the raw materials and the complete control of the entire molding process.

RELIABILITY

Unlike many centrifugal pumps on the market
the pump head of GemmeCotti pumps is fixed to the bracket with 8 bolts. This feature guarantees a firm fastening of the pump head to the bracket and avoid the casing deformation under pressure.

REVERSIBLE CONNECTIONS

In the HTT series pumps In and Out connections can be reversed changing the rotation direction of the motor.

STATIC SHAFT

The static shaft of the mag drive centrifugal pumps HTT series are made of Alumina 99,7% (Al2O3), an extremely resistant ceramic material, which guarantees the maximum stability and resistance to aggressive chemicals.

MAGNETS

The HTT pumps are equipped with NdFeB magnets that ensure a high magnetic torque.

MAGNETIC DRIVE DESIGN

Magnetic drive pumps are designed with a special sealless configuration that is suitable for transferring acids, chemicals, corrosive and dangerous liquids thanks to the high chemical resistance of their construction materials and to the absence of leakage and emissions. The structure is really simple and it requires very little maintenance with consequent saving in terms of repairing, spare parts and machine downtime (costs during the pump life).  This type of pump is not suitable for transferring liquids with solids.  Liquid must necessarily be clean and free of suspended solids (max presence of solid admitted: max 2% – max 1mm).
Discover more about magnetic drive pumps

OPTIONAL

FLANGES

On request GemmeCotti provides DIN e ANSI flanges for thermoplastic pumps (flat stub + slip-on flanges) and welded DIN o ANSI  flanges for pumps in AISI 316.

More informations about flanges

BASEPLATES

GemmeCotti baseplates are suitable for pump completed with motor with B3/B5 configuration. They allow the correct positioning of the pump.

More informations about baseplates

A1-13Y

We recommended the use of the dry-running protection device for all the applications where the constant presence of liquid in the pump is not always  ensured.

More informations about dry-running device

VIDEO TUTORIAL