Vertical centrifugal pumps with bracket series HVL are made of thermoplastic materials (PP and PVDF) and are suitable to pump high corrosive liquids with solids. These vertical pumps can transfer chemicals up to a capacity of 130 m3/h and a maximum head of 48 mlc. Pump series HVL are available with different column lengths from 500 mm to 2000mm.
HVL – VERTICAL CENTRIFUGAL PUMPS
HVL – VERTICAL CENTRIFUGAL PUMPS
Vertical centrifugal pumps made in thermoplastic materials
Industrial pumps suitable for high corrosive liquids containing solids
- Centrifugal pump with coupling.
- Materials available: PP, PVDF.
- Max flow: 130 m3/h; Max head: 48 mlc.
- Temperature: PP: max 70°C; – PVDF: max 90°C.
- Suitable for high corrosive liquids containing solids in suspension.
- Length of the column: from 500 to 2000 mm.
TECHNICAL DATA
* The head and flow of the pump refer to the performance with water at room temperature. Should liquids at high temperatures and with high viscosity and density be pumped the performance has to be calculated accordingly. The electric motor should be selected on the basis of the viscosity and the specific weight given by the customer.
* For any further information and quotation you can fill in the online form or send an email to info@gemmecotti.com. Our commercial office will select the pump suitable for your needs.
Related products
-
HV – VERTICAL CENTRIFUGAL PUMPS
- thermoplastic pumps made in PP or PVDF
- capacity up to 40 m3/h
- head up to 22 mlc
- column from 500 to 1000 mm
-
PVA – CANTILEVER VERTICAL CENTRIFUGAL PUMPS
- pumps made in AISI316
- capacity up to 24 m3/h
- head up to 26 mlc
- especially design for the production of PCBs
-
HTM-V – VERTICAL MAG DRIVE CENTRIFUGAL PUMPS
- thermoplastic pumps made in PP or PVDF
- capacity up to 22 m3/h
- head up to 20 mlc
- column length 320 mm